MULTI-PURPOSE LIQUID SILICONE FLUID

LUBRICANT, MOULD RELEASE, NON-STICK

WATERPROOFING, INSULATING, GLOSSING

COMPATIBLE AND USABLE ON ALL MATERIALS

CERTIFIED NSF H1 FOR THE FOOD INDUSTRY (IAA)

CAN BE APPLIED USING LOW-PRESSURE SPRAYERS

WITH TOTAL CONTROL OF DEPOSITION

 

 

 

 

DESCRIPTION

Multi-purpose product for difficult demoulding operations and lubrication problems in a clean environment.

Colourless, practically odourless product, with special non-stick properties at interfaces.

Can also be used as a waterproofing agent and a glossing agent. Gives the demoulded parts a satin-effect to glossy finish.

Can also be used as a non-stick agent for spatter during welding on parts or sheets not intended for subsequent painting or coating.

Usable on all materials such as wood, plastics, steel, carbon steel, chrome steel, and light or copper alloys.

Product with strong anti-fungal and anti-mildew properties.

Insulating fluid with dielectric strength of 14 kV.mm^-1.

Coefficient of thermal expansion: 9/9.10^-4 (cm³/cm³) in °C.

 

APPLICATIONS

AUTOMOTIVE: Use as a polish, renovator of imitation leather, leather, lubrication of electrical mechanisms, treatment of locks to prevent freezing.

BUILDING: Waterproofing of stones, concrete, beading effect, treatment of fibreboard, woodwork.

FOOD INDUSTRY; Non-stick treatment of moulds, nets, sealing of cork stoppers, lubrication of belts.

PLASTIC INDUSTRIES: Demoulding of rubber, plastics.

LEATHER: Waterproofing treatment.

HOSPITALS: Lubrication of equipment in rooms and theatres, slides, racks, etc.

FOUNDRIES: Treatment of hot boxes, core boxes, general use, resin-shell mould casting, light alloys in Reboul wax.

MECHANICAL APPLICATIONS: Non-stick treatment for welding nozzles, parts, metal sheets.

ELECTROTECHNICAL: Coating of porous insulators, capacitors, demoulding of insulating casting compounds.

ELECTRONICS: Non-weldable tropicalisation.

PAPER MILLS: Treatment of insulating papers.

Urban furniture.

PHARMACEUTICAL PRODUCTS: Non-stick for granulation, encapsulation, compression.

WOOD: Treatment of press platens.

TEXTILES: Extrusion of nylon wires.

WRAPPING, CANNERIES: Treatment of transfer belts, sealing jaws.

PRINTING: Treatment of cutters, dies.

PACKAGING: Treatment of blister packing and skin pack dies.

 

Download the data sheet

 

TYPICAL PHYSICAL-CHEMICAL PROPERTIES

PROPERTIES	STANDARD or METHOD	VALUES	UNITS
Appearance	Visual	Fluid	-
Saybolt colour	NF M 07.003 ASTM D 156	+10	value
Smell	Olfactory	No smell	-
Density at 20°C	ISO 12.155	774	g/l
Utilisation temperature range	-	-40°C+50°C	-
Surface tension at 20°C	ISO 6297	23.7	dyne/cm
Closed-cup flash point	ISO 2719	+64	°C
Freezing point	ISO 3016	-50	°C
Kinematic viscosity at 40°C	NF EN 3104	2.3	mm²/sec
ACTIVE SUBSTANCE PROPERTIES
PROPERTIES	STANDARD or METHOD	VALUES	UNITS
Kinematic viscosity at 25°C	NF EN 3104	1000	mm²/sec
Self-combustion point	ASTM E 659	>300	°C
Acid index la	ISO 6618	0.0	mg/(KOH)/l
Sulphated ash content	NFT 60,144	0.0	%
Impurities content larger than 5 µm	FTMS 791 3005	0	number/ml
Elastomer compatibility Dimensional variation 168 h at 40°C	FTM 791	less than 0.1	%
Environmental properties Bioaccumulation index Octanol/water ratio	OECD 107	less than 3	log kOW
Danger category for water	WGK	Category 1 no danger for water	category
Refraction index	ISO 5661	1.404
Dielectric strength	ASTM D 149 IEC 60.243	18	kV/mm

 

SAFETY PRECAUTIONS

Do not use on parts to be painted or bonded.

 

PRESENTATION

Can 20 L

 

Looking for another product?

Discover our entire IAA range by clicking on the photo

 

Manufacturing, lubrification, cleansing, protection,
IBiotec^® Tec Industries^® Service
offers a wide range of products reserved for industrial area

 

---

 If you wish for :

 

a free sample
a technical advice
a product data sheet
a safety data sheet

 

- Please contact us -

 

---

IBiotec^® Tec Industries^®Service
manufacturer of technical chemical products.
Welcome to our website.

---

IBiotec^® Tec Industries^®Service is on :